KEY:   = Light is flashing

		Secondary Codes ("x" can be any number from 0 to 9)
Lights	Primary Code/Message	90x	91x	92x	93x	94x	95x	96x	97x	98x	99x
Continue
Ready
Toner Low
Load Paper
Paper Jam
! Error

How to Proceed

Connect the secondary error code you obtained with the list of meanings and possible solutions listed below.

• A 90x error is a software error. 
•  
• A 91x error indicates a problem with the DC motor or the transfer roller. The printer will require service to correct the issue. Please see Additional Assistance below for more information.
   
• A 92x error indicates a problem with the fuser unit or the toner sensor. The printer will require service to correct the issue. 
   
• A 93x error indicates a problem with the printhead unit, drive motor, or points to an RIP/engine communication failure. The printer will require service to correct the issue. 
•  
• A 94x error indicates a problem with the engine board or a RIP/engine communication failure. The printer will require service to correct the issue. .
   
• A 95x error indicates a problem with the controller card (specifically the NVRAM, ROM, or NAND). The printer will require service to correct the issue.  
• A 96x error indicates a failure with the RAM memory.
  1. Power off the printer and remove all installed optional memory.
  2. Power on the printer and try printing again.
     If this does not clear the error, the printer will require service to correct the issue.
  3.  
• A 97x error is a Network error.
  1. Power off the printer, disconnect all cables, and power the printer on again.
  2. If this clears the error, confirm that your network is set up correctly.
     If this does not clear the error, the printer will require service to correct the issue. 

A 98x error indicates a paper port communication error. The printer will require service to correct the issue.

A 99x error indicates a problem with an optional paper feed device. 

1. Power off the printer and remove all optional paper feed devices that are installed on it.
2. Power on the printer and try printing again.
   If this clears the error, there is a failure within the paper feed option.
   If this does not clear the error, the printer will require service to correct the issue.